About This Product
The BAT-6V series batteries are Intrinsically Safe, rechargeable sealed lead acid batteries. Absorbent Glass Mat (AGM) technology for superior performance. Valve regulated, spill proof construction allows safe operation in any position.
The integrated current limit circuit will allow a minimum of 2.5 Amps to flow from the battery. If the load increases past that point, the current will be limited to an average current of 200mA.
Protection devices clamp the charge voltage at 12 VDC. The internal fuse will blow if charge current reaches 5 Amps. This fuse is not repairable and the battery must be discarded.
Specifications
Voltage
6V DC
Capacity
2.5 AHr to 12 AHr
Max Charge Voltage
8V DC
Max Discharge rate
2.5A
Hazardous Location Rating
Exib II B, T3 (Vo=8.01V, Ao=4.425A)
Models
| Model Numbers | Capacity |
| BAT-6V-2.5-IS | 2.5 Amp Hour |
| BAT-6V-2.9-IS | 2.9 Amp Hour |
| BAT-6V-3.5-IS | 3.5 Amp Hour |
| BAT-6V-4.5-IS | 4.5 Amp Hour |
| BAT-6V-5.0-IS | 5.0 Amp Hour |
| BAT-6V-6.5-IS | 6.5 Amp Hour |
| BAT-6V-7.0-IS | 7.0 Amp Hour |
| BAT-6V-8.0-IS | 8.0 Amp Hour |
| BAT-6V-9.0-IS | 9.0 Amp Hour |
| BAT-6V-12-IS | 12.0 Amp Hour |
Warnings
- Do not service.
- Do not charge batteries unless in a Non Hazardous Area.
- Do not replace battery with explosive gasses present
This unit is a component piece of equipment and requires to be housed in an approved enclosure and is subject to investigation after the final assembly is completed.
Gallery
TIP: Select a picture below to enlarge it.
